Save Up To 25% Off
Silver Series - 15% off
Silver 2007G - 25% off
Offer Valid From Oct 25th to Dec 31st, 2024
Monitor Audio Radius (Each) R390BL
Monitor Audio Radius (Each) R390BL
Monitor Audio Radius (Each) R390WN
You may also like
Promising the astonishing low frequency resolution of the 380 with the added depth, impact and control of a larger bass engine, the Radius 390 demolishes assumptions of size versus performance. With every earth-shaking transient, you’ll be more convinced that the compact 390 is truly ‘ground-breaking’ in form and function. A system of twin colour-coded 10” C-CAM® active/ABR drivers is powered by a 220W Class D amplifier to expand levels of output and extension, releasing a rich layer of penetrating bass, mesmerising in its consistency and scale. You’ll get agility as well, for rhythmic depth with music, and dynamic reinforcement in home theatre systems - all this from a beautiful little cube that liberates living space. In tune with Radius philosophy the 390 is perfect for lifestyle but sonically it’s in a class of its own. Enjoy rapid EQ optimisation from Impact, Music and Movie settings, and system automation via the 12V trigger.
- 18mm MDF cabinet construction with internal bracing
- Cool-running 220W Class D amplifier with switch mode power supply (SMPSU)
- Twin side-firing 10” C-CAM® drivers - one active and one passive ABR
- Low pass filter switch – for LFE or Stereo input selection
- Power switch with ON – Auto- Off/ trigger settings
- Stereo/ LFE RCA inputs
- 3 x Pre-set EQ settings – Music/Movie/Impact
Customizations | |
---|---|
System Format | Active sub-woofer system – Auxiliary (ABR) loading. 18mm MDF cabinet |
Low Frequency Limit | 30Hz (- 6dB) |
Upper Frequency Limit | Variable 40 – 120 Hz @ 24dB/Octave |
Amplifier Power Output | 220 Watts @ 1% THD+N |
Amplifier Classification | Class D amplifier with Switch mode power supply (SMPSU) |
Bass EQ Switch | Music/ Movie/ Impact |
Phase Control | 0 & 180 degrees |
Auto Sensing | Line Level >3.5mV |
Input Level Requirements | Standby after approximately 15 minutes if no signal sensed |
Driver Compliment | 1 x 10” (250mm) C-CAM® long throw driver 1 x 10” (250mm) Auxiliary bass radiator |
Input Impedance | > 20K Ohms |
Mains Input Voltage | AC 110 - 120 V ~ 50/60Hz; AC 220 - 240 V ~ 50/60Hz (Factory Region Preset) |
Dimensions including amp & feet(H x W x D) | 348 x 330 x 345mm (1311/16 x 13 x 129/16 Inches) |
Connections | Stereo RCA in, LFE in, 12v Trigger in (3.5mm mono mini-jack) |
12v Trigger Input | 5 - 12v via 3.5mm mono mini-jack socket |
Power Consumption | 220 Watts / 0.5 Watts in Standby (ErP approved) |
Weight (Unpacked) | 13.76Kg (30lb 4oz) |